Avaya J129 Installing And Administering page 78

Appendix
Parameter name
ENABLE_OOD_MSG_TLS_ONLY
ENABLE_OPUS
ENABLE_PHONE_LOCK
ENABLE_RECORDING
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Default value Description
1 Specifies if an Out-Of-Dialog (OOD) REFER must
be received over TLS transport to be accepted.
Value Operation
• 0: No, TLS is not required.
• 1: Yes, TLS is required.
Specifies if the OPUS codec capability of the
phone is enabled or disabled.
Value Operation
• 0: Disabled.
• 1: Enabled OPUS wideband with bitrate of
20KBps.
• 2: Enabled OPUS narrowband with bitrate of
16KBps.
• 3: Eanbled OPUS narrowband with bitrate of
12KBps.
1 Specifies if on the idle phone screen, a softkey and
a feature button must be displayed to allow users
to manually lock the phone.
Value Operation
• 0: Disabled. Lock softkey and feature button is
not displayed.
• 1: Enabled. Lock softkey and feature button is
displayed.
0 Specifies if audio debug recording is enabled for
users.
Value Operation
• 0: Audio debug recording is disabled.
• 1: Audio debug recording is enabled.
Comments on this document? infodev@avaya.com
Note:
Multiple registered phones can lead to service
disruption.
Note:
A value of 0 is only intended for testing
purposes.
Note:
Avaya J129 IP Phone does not support third-
party local call conference with OPUS.
Table continues...
78