Avaya J129 Installing And Administering page 69

Parameter name
AUTH
AUTHCTRLSTAT
AUTO_ANSWER_MUTE_ENABL
E
B
BRANDING_VOLUME
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Default value Description
Value operation:
• 0: Normal
• 1: Softer by three levels.
• 2: OFF.
• 3: Softer by one level.
• 4: Softer by two levels.
• 5: Softer by four levels.
• 6: Softer by five levels.
• 7: Softer by six levels.
• 8: Louder by one level.
• 9: Louder by two levels.
Specifies if the script files are to be downloaded
from an authenticated server over an HTTPS link.
Value operation:
• 0: Optional
• 1: Mandatory
0 Specifies that the enhanced debugging capabilities
are activated from an SSH server by an AVAYA
engineer.
Value operation:
• 0: Enhanced debugging capabilities are disabled.
• 1: Enhanced debugging capabilities are enabled.
1 Specifies the status of the mute function for the
auto-answered calls.
Value operation:
• 0: Disabled
• 1: Enabled
5 Specifies the volume level at which the Avaya
audio brand is played.
Comments on this document? infodev@avaya.com
List of configuration parameters
Note:
The parameter must be set to 1 only for the
debugging period. Set the parameter back to
0 when debugging is complete.
Table continues...
69