Avaya J129 Installing And Administering page 89

Parameter name
MYCERTWAIT
N
NO_DIGITS_TIMEOUT
O
OCSP_ACCEPT_UNK
OCSP_CACHE_EXPIRY
OCSP_ENABLED
OCSP_HASH_ALGORITHM
OCSP_NONCE
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Default value Description
The valid values can range from Zero to 255 ASCII
characters. The default value is null .
1 Specifies the phone's behavior if the SCEP server
indicates that the certificate request is pending for
manual approval.
Value Operation
• 0: Poll the SCEP server periodically in the
background.
• 1: Wait until a certificate is received or the
request is rejected.
20 Specifies the number of seconds the phone waits
for a digit to be dialed after going off-hook and
before generating a warning tone.
Valid values are 1 through 60.
1 Specifies that whether to close a TLS connection
during an unknown certificate revocation status.
Value operation:
• 0: Certificates are revoked and the TLS
connection is closed.
• 1: Certificates are accepted.
2880 Specifies the time interval for the OCSP cache
expiry in minutes. Valid range is from 60 to 10080
0 Specifies that OCSP is used to check the
revocation status of the certificates. Value
operation:
• 0: Disabled.
• 1: Enabled for all peer TLS connections on SIP,
HTTPS, and EAP-TLS.
0 Specifies the hashing algorithm for OCSP request.
Value operation:
• 0: SHA1
• 1: SHA256
1 Specifies that whether a nonce is added in the
OCSP requests and expected in the OCSP
responses. Value operation:
• 0: Not added.
• 1: Added.
Comments on this document? infodev@avaya.com
List of configuration parameters
Table continues...
89