Avaya J129 Installing And Administering page 71

Parameter name
CNGLABEL
CONFERENCE_FACTORY_URI
CONNECTION_REUSE
CONTROLLER_SEARCH_INTER
VAL
COUNTRY
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Default value Description
1 Determines if personalize button labels can be
displayed to the user.
Value Operation
• 0: capability not displayed to the user.
• 1: capability displayed to the user.
Null Specifies the URI for conference for Network
Conferencing in third-party call control setup.
Valid values contain zero or one URI, where a URI
consists of a dial string followed by @, and then
the domain name, which must match the routing
pattern configured in System Manager for Adhoc
Conferencing.
Depending on the dial plan, the dial string can
need a prefix code, such as a 9 to get an outside
line. The domain portion of the URI can be in the
form of an IP address or an FQDN.
The value can contain 0 to 255 characters. The
default value is null.
1 Specifies whether the phone will use two UDP,
TCP, or TLS connection (for both outbound and
inbound) or one UDP, TCP, or TLS connection.
Value operation:
• 0: Disabled. The phone opens oubound
connection to the SIP Proxy and listening socket
for inbound connection from SIP proxy in parallel.
• 1: Enabled. The phone does not open a listening
socket and will maintain and re-use the sockets it
creates with the outbound proxies.
Specifies the number of seconds the phone will
wait to complete the maintenance check for
monitored controllers.
Valid values are 4 through 3600.
Used for network call progress tones.
• For Argentina use keyword Argentina.
• For Australia use keyword Australia.
• For Brazil use keyword Brazil.
• For Canada use keyword USA.
• For France use keyword France.
• For Germany use keyword Germany.
Comments on this document? infodev@avaya.com
List of configuration parameters
Table continues...
71