Resetting System Values - Avaya J129 Installing And Administering

• For the Supplicant:
- Disabled: If DOT1XSTAT = 0
- Unicast: If DOT1XSTAT = 1
- Multicast: If DOT1XSTAT = 2
7. Press Save.
When you change the 802.1X data, the phone restarts after you exit the admin menu.

Resetting system values

About this task
Use this procedure to reset all system initialization values to the application software default values.
Caution:
This procedure erases all static information, without any possibility of recovering the data.
Procedure
1. Press Admin menu > Admin.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Reset to defaults.
5. Press Reset when the phone prompts for confirmation.
The phone resets from the beginning of registration, which might take a few minutes.
The phone resets:
• All system values and system initialization values except AUTH and AUTH_ONLY to
default values.
• The 802.1X ID and Password to their default values.
• Call server values to their defaults.
• Any entries in the Redial buffer.
• Does not affect user-specified data and settings like Contacts data or the phone login and
password.
After reset, the phone displays the Log In screen.
Note:
Avaya J129 IP Phone parameters stored for a particular user are not reflected in other
phones, for example, 9600 Series IP Deskphones, even if the SIP user is the same.
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Comments on this document? infodev@avaya.com
Resetting system values
63