Sending the internal clock as MIDI-clock
The internal clock may be send out as a MIDI-clock from the MIDI OUT jack. To do so, enable the
EDIT parameter [4] SEND CLOCK. Carry out the following steps to do so:
1.
Make sure, the '14 Analogsynthesizer is in standard play mode (ARPEGGIATOR switch set to
OFF).
Enter the edit mode by pressing the [EDIT] button – the corresponding LED will be lit.
2.
Use the select dial to select the EDIT parameter [4] SEND CLOCK.
3.
Pressing the VALUE button activates or deactivates sending of the internal clock reference as
4.
MIDI-clock data (activated if VALUE LED lit, deactivated if VALUE LED unlit).
Exit EDIT mode by pressing the [EDIT] button again.
5.
72