Sending arpeggios via MIDI
Arpeggios and sequences can be output as MIDI notes via the MIDI OUT output. For doing so, you
need to activate EDIT parameter [5] SEND ARP/SEQ. Carry out the following steps to do so:
1.
Make sure, the '14 Analogsynthesizer is in standard play-mode (ARPEGGIATOR switch
set to OFF).
Enter the edit mode by pressing the [EDIT] button – the corresponding LED will be lit.
2.
Use the select dial to select the EDIT parameter [5] SEND ARP/SEQ.
3.
Pressing the VALUE button activates or deactivates the sending of arpeggio- and sequence-
4.
data via MIDI (activated if VALUE LED lit, deactivated if VALUE LED unlit).
Exit EDIT mode by pressing the [EDIT] button again.
5.
70
i