Safety Information - Vermona '14 Analogsynthesizer User Manual

Safety information

The following safety precautions must be observed during all phases of operation, service and repair
of the '14 Analogsynthesizer. Failure to comply with these precautions or with specific warnings in
this manual violates safety standards of design, manufacture and intended use of this equipment.
The manufacturer assumes no liability for the customer's failure to comply with these
requirements!
Protection from voltage peaks
The '14 Analogsynthesizer is designed to cope with voltage peaks, which occur in daily use. When
using the unit with unstable voltage, please make sure that the device is grounded.
Cleaning
Please only clean the '14 Analogsynthesizer with a dry cloth (included with the unit). Do not use
sharp cleaning fluids or water!
Use near explosive goods
The '14 Analogsynthesizer shall not be used near easy flammable or explosive goods, like any
electric unit.
Dampness
The '14 Analogsynthesizer shall not be used in damp or wet places. This includes humid
environments with wet walls, floors, ceilings etc. Avoid high humidity because this could cause
condensation within the unit.
ATTENTION! RISK OF ELECTRIC SHOCK!
Connections
Do not use cables, plugs or any accessories which are not explicitly labeled to be used for normal
operation.
Ventilation
The '14 Analogsynthesizer shall not be used near heating systems, warm or hot fans etc. When using
the unit in fixed installations, make sure there is enough space to let generated heat dissolve.
Spare parts or modifications
Modification instructions and schematic information should only be used from service departments
of officially authorized dealers. To prevent the risk of electrical shock, you must not perform any
service-tasks or modifications which are not specially marked as such.
42