Sequences; Saving Arpeggios As Sequences; Playback Of Sequences - Vermona '14 Analogsynthesizer User Manual

Sequences

Arpeggios may be saved as transposable sequences in up to 16 storage locations.

Saving arpeggios as sequences

Carry out the following steps to save an arpeggio as a sequence:
While the arpeggio is playing, move the ARPEGGIATOR switch
1.
position. The arpeggio will now continue even if the keys or the sustain-pedal have been
released. The yellow LED above the VALUE button will blink depending on the note length
being set.
2. Use the select dial to select the desired storage location 1 to 16.
Save the sequence by pressing the VALUE button. To terminate the procedure, move the
3.
ARPEGGIATOR switch back to ARP or the OFF position.
Neither the tempo source (TEMPO SRC) nor the note length (GATE LENGTH) will
H
be saved with the sequence. Therefore, these parameters can be changed during
playback at will.

Playback of sequences

The saved sequences are simply played back by pressing keys on the keyboard. To do so, set the
ARPEGGIATOR switch to its position SEQ. Sequences may also be switched during playback.
User Guide '14 Analogsynthesizer
from ARP to the SEQ
i
EN
69