Internal Clock And Midi-Clock; Activating Midi-Clock - Vermona '14 Analogsynthesizer User Manual

Internal clock and MIDI-clock

The '14 Analogsynthesizer has a built-in internal clock that serves as tempo- and synchronization-
reference for the LFO resp. the arpeggiator.
The speed of the internal clock is set by evenly hitting the TAP button three times. The yellow LED
located above will display the speed.

Activating MIDI-clock

Instead of the internal clock-reference an external MIDI-clock can be selected. To do so, deactivate
the EDIT parameter [3] INTERNAL CLOCK. Carry out the following steps to do so:
1. Make sure, the '14 Analogsynthesizer is in standard play-mode (ARPEGGIATOR switch
set to OFF).
Enter the edit mode by pressing the [EDIT] button – the corresponding LED will be lit.
2.
3. Use the select dial to select EDIT parameter [3] INTERNAL CLOCK.
Press VALUE to activate reception of the external MIDI clock (VALUE LED will be lit) or to
4.
deactivate it (VALUE LED unlit). As soon as the external MIDI clock is activated, the internal
clock is disabled for internal use.
Exit EDIT mode by pressing the [EDIT] button again.
5.
User Guide '14 Analogsynthesizer
EN
i
71