Amplifier
The final element in the signal chain is the voltage controlled amplifier (VCA). Here, the output
volume is being adjusted and dynamically shaped by envelope generator EG 2.
The MODE switch sets the general operation mode of the VCA. When set to ON, the VCA is
permanently active.
When set to positions EG 2 and EG 2 + LFO, the VCA is dynamically controlled by envelope generator
EG 2 resp. by an additional modulation by the LFO during the sustain phase. Find additional details
in chapter "Envelope generators" on page 57
MASTER VOLUME adjusts the volume for both main outputs
on the rear panel of the
d
'14 Analogsynthesizer.
PHONES sets the volume for both headphone outputs
below the modulation wheels.
s
56