Spare parts or modifications Modification instructions and schematic information should only be used from service departments of our official authorized VERMONA dealers. To prevent the risk of electrical shock, please do not open or modify the unit yourself. Before opening the unit always disconnect the power lead/AC Adapter.
PAN and VOLUME: volume and panorama control for each channel Sound programming parameter controls TRIG button and LED: for triggering the sound MASTER: Sets the main output level of the DRM1 MKIII. PHONES: Jack for connecting a headphone. Rear Panel POWER IN: Power jack with integrated fuse.
Connect the DRM1 MKIII with the included power cord to the power socket. • Connect the outputs of the DRM1 MKIII (10) with the line inputs of your mixing console, amplifier, … (Alternatively, you can use a headphone with the Phones jack (7).) •...
The Channels of the DRM1 MKIII In this chapter each channel of the DRM1 MKIII will be described shortly, for a better understanding of the programming parameters. The parameters PAN and VOLUME as soon as the TRIG button, occurs in every channel. So they were overlooked in the channel descriptions.
The closed hat has a fixed decay time, which is short and independent of the DECAY controller (in this mode it has no function).Whenever the DRM1 MKIII will be switched on, the TRIG button triggers the cymbal/open hat –...
When having sent eight midi-on messages to the DRM1 MKIII, it will jump to the normal play mode – the assignments are stored (also after switching the device off). NOTE: If the DRM1 MKIII is in the learn mode and doesn’t receive any midi message, the factory settings will be restored.
Individual Outs/Inserts Each channel of the DRM1 MKIII is equipped with a separate output/insert (9), which can be used in different ways. Deciding for the function of the jack (9) is the used cable type, or rather the plug assignment of the cable.
Declaration of conformity for VERMONA DRM1 MKIII – analog drum synthesizer We declare under our sole responsibility that this product is in conformity with the following standards or standardization documents in attention of operation conditions and installation arrangements acc. to operating...
Need help?
Do you have a question about the DRM1 MKIII and is the answer not in the manual?
Questions and answers