Exterior Lam P Switch - Mercedes-Benz C 230 1998 Owner's Manual

P 54.25-0205-20
C om bination Sw itch
1 Low beam (exterior lamp
switch position E 3 )
2 High beam (exte rio r lamp
switch position r a )
3 High beam flasher (high beam
available independent of
exterior lam p sw itch position)
4 Turn signals, right
5 Turn signals, left
60
6
P 54.20-0206-20
To signal m inor directional
changes, such as changing lanes
on a highway, move com bination
switch to the point of resistance
only and hold it there.
To operate the turn signals
continuously, m ove the com bi­
nation switch past the point of
resistance (up or down). The
switch is autom atically canceled
when the steering wheel is turned
to a large enough degree.
6 C ontrol fo r w indshield
w iper/w asher system :
7
Push briefly for a single wipe
w ithout adding w asher fluid (use
only when w indshield is wet)
Push past detent point:
• w indshield w asher system
• optional headlam p cleaning
system (only in e xterior lamp
positions E ia or i a i.
W hen the w asher system is
activated, the w ipers also
operate fo r a limited time.
7 W indshield w iper
0 W iper off
1 Interm ittent w iping
(optional rain sensor:
One initial wipe, pauses be­
tween w ipes are autom atical­
ly controlled by a rain sensor
m onitoring the w etness of the
w indshield.)
II Normal w iper speed
III Fast w iper speed
Note:
The w indshield w asher reservoir,
hoses and nozzles are autom ati­
cally heated.