Table of Contents
Advertisement
10
en | Introduction
3.3
Performance Characteristics
–
–
–
–
–
–
–
–
–
Notice!
If an external power supply is used, this should also guarantee an uninterruptable power
supply (UPS). Example: Bosch power supply APS-PSU-60 (F.01U.282.970).
3.4
System Overview
The AMC2-4WE is connected between the access controller AMC2-4W and the various
peripheral devices.
Figure 3.4: System overview
1 =
2 =
3 =
4 =
5 =
2020-01 | V02 |
Controlled by an AMC2 via RS-485
Reader interfaces
–
four two Wiegand interfaces
Eight relay outputs
–
voltage free, power is supplied externally (dry mode)
–
powered by internal power supply (wet mode)
Eight analog inputs with internal power supply
Transfer rate to the extension interface: 9,6 kBit/s
Self regulating transmit/receive switching
Power supply:
–
10V - 30Vdc - max. 3 A
–
or over the RS-485 host connector
Information about the inputs and outputs on the display of the AMC2 controller
Tamper contact for external covers
Host
AMC2-4W
Card reader
Communication and power supply
AMC2-4WE
Installation manual
Access Modular Controller 2
Bosch Access Systems B.V.
Advertisement
Table of Contents
