Figure 3-1: Hdd Slot Cover Retention Screws; Figure 3-2: Remove Hdd Bracket - IEI Technology UPC-F12C-ULT3 User Manual

Figure 3-1: HDD Slot Cover Retention Screws

Step 2: Pull out the HDD bracket for installing HDD from the system.

Figure 3-2: Remove HDD Bracket

Step 3: Attach an HDD to the HDD brackets. To do this, align the four retention screw
holes on the bottom side of the HDD with the retention screw holes in the HDD
brackets. Insert four M3*4 retention screws shipped with the package into the
HDD bracket (Figure 3-4).
Page 16
UPC-F12C-ULT3 Panel PC