Table of Contents
Advertisement
MOPSlcdGX1 Product Manual
Notes:
(*)
Key pin for PC/104; GND for PC/104+ specification
(**) Not supported on MOPSlcdGX1.
(***) To protect external power lines of peripheral devices, make sure that
-- the wires have the right diameter to withstand maximum available current
-- the enclosure of the peripheral device fulfils fire-protecting requirements
of IEC/EN 60950.
6.2
Configuration
Refer to the
PCI Configuration Submenu
for information on configuraton.
6.3
Adapter Card Mounting
PC/104 adapter cards are mounted in a stack-through manner. Adapter cards are designed
with plugs on their undersides that mate with the PC/104 socket connectors of the
MOPSlcdGX1. PC/104 adapters can support the socket-connector version on their
topside and allow further stacking of adapters.
Kontron Embedded Modules
in the
Appendix B: BIOS Operation
13
ISA Expansion
chapter
Revision 1.3
Advertisement
Table of Contents
