Usb Interface; Connectors (X6 And X7); Configuration - Kontron MOPSlcdGX1 Product Manual

MOPSlcdGX1 Product Manual

7. USB INTERFACE

The MOPSlcdGX1 comes with two USB ports, which you can expand by adding external
hubs. You can connect up to 127 USB peripherals on each hub.
For more information on USB interfaces, please see the
Standards chapter.
7.1

Connectors (X6 and X7)

To find the location of Connectors X6 and X7 on the MOPSlcdGX1 board, please see the
Appendix E: Connector Layout
Pin Pin Function
1 +5V
2 USB-
3 USB+
4 GND
Use power contacts on Pin 1 and Pin 4 for internal USB devices only.
Note: Use a fuse to power on external USB connectors.
7.2

Configuration

Refer to the I/O Device Configuration Submenu
chapter for information on configuraton.
Kontron Embedded Modules
Appendix G: Literature and
chapter.
in the Appendix B: BIOS Operation
14
USB Interface
Revision 1.3