Programming - Kontron MOPSlcdGX1 Product Manual

MOPSlcdGX1 Product Manual
26.3.2 Serial ATA
Serial AT Attachment (ATA) Working Group
This X3T10 standard defines an integrated bus interface between disk drives and
host processors. It provides a common point of attachment for systems
manufacturers and the system.
We recommend you search for 4.2 I/O cable information if you use hard disks in a
DMA3 or PIO4 mode.
26.3.3 USB
USB Specification
USB Implementers Forum, Inc. is a non-profit corporation founded by the group
of companies that developed the Universal Serial Bus specification. The USB-IF
was formed to provide a support organization and forum for the advancement and
adoption of Universal Serial Bus technology.

26.4 Programming

• C Programmer's Guide to Serial Communications, Second Edition, Joe
Campbell, SAMS, 1987, ISBN 0-672-22584-0
• Programmer's Guide to the EGA, VGA, and Super VGA Cards, Third Edition,
Richard Ferraro, Addison-Wesley, 1990, ISBN 0-201-57025-4
• The Programmer's PC Sourcebook, Second Edition, Thom Hogan, Microsoft
Press, 1991, ISBN 1-55615-321-X
• Undocumented PC, A Programmer's Guide to I/O, CPUs, and Fixed Memory
Areas, Frank van Gilluwe, Second Edition, Addison-Wesley, 1997, ISBN 0-201-
47950-8
Kontron Embedded Modules
Appendix G: Literature and Standards
64
Revision 1.3