Table of Contents
Advertisement
MOPSlcdGX1 Product Manual
10. KEYBOARD AND FRONT-PANEL INTERFACE
The keyboard and front-panel interface consists of the following:
• Keyboard
• Reset
• Battery
• Speaker
For more information on keyboard and front-panel interfaces, please see the
G: Literature and Standards
10.1 Connector (X10)
To find the location of Connector X10 on the MOPSlcdGX1 board, please see the
Appendix E: Connector Layout
Pin
Signal Name
1
SPKR
2
GND
3
RESIN
4
KLOCK#
5
KDATA
6
KCLK
7
GND
8
VCC (*)
9
VBAT
10
POWERGOOD
(*)To protect external power lines of peripheral devices, make sure that:
Note:
- wires have the right diameter to withstand the maximum available current
- the enclosure of the peripheral device fulfils the fire protecting requirements of
IEC/EN 60950.
10.2 Configuration
Refer to the
Keyboard Features Submenu
chapter for information on configuraton.
Kontron Embedded Modules
Keyboard and Front-Panel Interface
chapter.
chapter.
Function
5-pin Diode
Keyboard
Adapter
Speaker output
Ground
Reset input 1
Keyboard lock
Keyboard data
2
Keyboard clock
1
Ground
4
+5V
5
VBAT input (max. 3,3V)
Reset input 2
in the
Appendix B: BIOS Operation
18
Appendix
6-pin Minidin
Keyboard
Adapter (PS2)
1
5
3
4
Revision 1.3
Advertisement
Table of Contents
