Kontron MOPSlcdGX1 Product Manual page 54

MOPSlcdGX1 Product Manual
21.3.8 I/O Device Configuration Submenu
Feature
Local Bus IDE adapter
Onboard FDC
External FDC
Base I/O address
Floppy Drive Swap
Serial Port A
Serial Port B
Serial Port C
Serial Port D
Base I/O address
IRQ (Port A and B)
IRQ (port C and D)
Onboard LPT
External LPT
Mode
Base I/O address
IRQ
DMA
Mode
Base I/O address
Kontron Embedded Modules
Option
Disabled
Primary
Secondary
Both
Disabled
Enabled
Disabled
Enabled
Primary
Secondary
Disabled
Enabled
Disabled
Enabled
Auto
Disabled
Enabled
Auto
3F8h, 2F8h, 3E8h, 2E8h
IRQ 3, IRQ 4
IRQ 10, IRQ 11
Disabled
Enabled
Auto
Disabled
Enabled
Auto
Output only
Bi-directional
ECP
EPP
378h, 278h, 3BCh
IRQ 5, IRQ 7
DMA1, DMA3
Output only
Bi-directional
EPP
378h, 278h, 3BCh
48
Appendix B: BIOS Operation
Description
Enables onboard PCI IDE device.
Enables onboard FDC controller.
Enables external FDC controller.
Selects base address of the FDC
controller. (Primary = 3F0h,
Secondary = 370)
Determines whether to swap the
Floppy A & B drives.
Disabled turns off the port. Enabled
requires end user to enter the base
I/O address and IRQ. Auto makes
the BIOS or OS configure the port,
depending on PNP OS setting.
Disabled turns off port.
Enabled requires end user to enter
base I/O address and IRQ. Auto
makes BIOS or OS configure the
port, depending on PNP OS setting.
Select I/O base of port.
Select IRQ of Port A and B
Select IRQ of Port C and D
Disabled turns off the port. Enabled
requires end user to enter base I/O
address and the IRQ. Auto makes
the BIOS or OS configure the port,
depending on PNP OS setting.
Disabled turns off the port. Enabled
requires end user to enter base I/O
address and the IRQ. Auto makes
the BIOS or OS configure the port,
depending on PNP OS setting.
Set the mode for the parallel port.
Select I/O base of port.
Select IRQ of parallel port.
Select DMA channel of port if in ECP
mode.
Sets the mode for the parallel port on
the backplane. ECP is not supported.
Select I/O base of LPT port on
backplane.
Revision 1.3