Table of Contents
Advertisement
MOPSlcdGX1 Product Manual
15.1 Connector (X17 and X18)
To find the location of Connectors X17 and X18 on the MOPSlcdGX1 board, please see
the
Appendix E: Connector Layout
15.1.1 Connector Pinout
Pin#
Signal Name
1
1
TXD+
1
2
TXD-
2
3
RXD+
4
NC
5
NC
2
6
RXD-
7
NC
8
NC
Notes:
1
TXD+, TXD- Differential output pair drives 10 and 100Mb/s Manchester-encoded
data to the 100/10BASE-T transmit lines.
2
RXD+, RXD- Differential input pair receives 10 and 100Mb/s Manchester-
encoded data from the 100/10BASE-T receive lines.
15.2 Configuration
You can configure the on-board PCI Ethernet interface via the PhoenixBIOS Setup
Utility. You can assign it to an available I/O and IRQ location.
Refer to the
Ethernet Configuration Submenu
chapter for additional information on configuraton.
15.3 Ethernet Technical Support
You can solve some Ethernet problems by using the latest drivers for the DAVICOM
DM9102A controller. Kontron Embedded Modules provides you with the latest tested
drivers, which can differ from newer ones.
For further technical support, contact either Kontron Embedded Modules or get support
information and download
Kontron Embedded Modules
chapter.
Function
100/10BASE-T Transmit
100/10BASE-T Transmit
100/10BASE-T Receive
Unused Pin
Unused Pin
100/10BASE-T Receive
Unused Pin
Unused Pin
in the
software updates
from DAVICOM.
32
Ethernet-Controller Interface
In/Out
Differential Output
Differential Output
Differential Input
Differential Input
Appendix B: BIOS Operation
Revision 1.3
Advertisement
Table of Contents
