Setup Boot Menu - Kontron MOPSlcdGX1 Product Manual

MOPSlcdGX1 Product Manual

21.6 Setup Boot Menu

Feature
Floppy Check
Summary Screen
QuickBoot Mode
Dark Boot
►Boot Device Priority
Onboard LAN RPL ROM
Notes: In the Option colum, bold represents the default settings.
If the onboard LAN RPL ROM is enabled, the LAN-boot ROM asks during bootup which
LAN-boot option to use.
21.6.1 QuietBoot
Upon turn on or reset, QuietBoot displays a black screen as the default or a grapical logo
instead of a text-based POST screen, which displays diagnostic messages.
The graphical logo is visible until just before the OS-load unless:
• <Esc> is pressed to display the POST screen
• <F2> is pressed to enter Setup
• POST issues an error message
• BIOS or option ROM requests keyboard input
21.6.2 MultiBoot
Multiboot allows you to select the following boot device:
• Hard disk
• Floppy disk
• CD-ROM
Kontron Embedded Modules
Option
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Submenu
Disabled
Enabled
52
Appendix B: BIOS Operation
Description
Enabled verifies floppy type
on boot.
Disabled speeds boot.
Displays system
configuration on boot.
Allows the system to skip
certain tests while booting.
This will decrease the time
needed to boot the system.
Enables the QuietBoot
feature.
Opens Boot Device Priority
submenu.
Enables the remote boot
BIOS extension for the
onboard LAN controller
Revision 1.3