Table of Contents
Advertisement
MOPSlcdGX1 Product Manual
Feature
IRQ
USB Host Controller
USB BIOS Legacy
Support
►Watchdog Settings
Notes:
The options noted in italics are only visible if an additional I/O controller (SMSC669) is on the
OEM backplane.
Options noted in bold and bold italics are default settings.
The FDC and LPT settings marked with an asterisk (*) are mutually exclusive. Drive swap is
enabled automatically to get to Drive A.
If legacy USB is enable, IRQ1 and IRQ2 do not wake the system from standby or suspend state;
the UMB region DC000h-E3FFFh is reserved.
21.3.9 Watchdog Settings Submenu
Feature
Mode
Timeout
Note: In the Option column, bold shows default settings.
Kontron Embedded Modules
Option
IRQ 5, IRQ 7
Disabled
Enabled
Disabled
Enabled
Submenu
Option
Disabled
Reset
15s, 45s, 1:15m, 2:15m, 5:15m,
10:15m, 30:15m
49
Appendix B: BIOS Operation
Description
Select IRQ of parallel port on
backplane.
Enable or disable onboard USB
controller.
Enable or disable support for USB
keyboard and mice. Enable for use
with non-USB aware OSes such as
UNIX and DOS.
Opens WDT Settings submenu.
Description
Select watchdog operation mode.
Max. trigger period.
Revision 1.3
Advertisement
Table of Contents
