Client Radius Supplicant - Siemens SCALANCE W1780 Configuration Manual

6.10.4.5

Client RADIUS Supplicant

Client Supplicant
On this WBM page, you configure the settings for the RADIUS authorization of the client.
Note
This page is only available for clients or access points in client mode.
Description
The table has the following columns:
● Security Context
Shows the security context.
● Dot1x User Name
Enter the user name with which you want to log on to the RADIUS server.
● Dot1x User Password
Enter the password for the user name selected above. The client logs on with the RADIUS
server using this combination.
For password assignment, ASCII code 0x20 to 0x7e is used.
● Dot1x User Password Confirmation
Confirm the password.
Note
Dot1X user name and Dot1X user password
With WPA (RADIUS), WPA2 (RADIUS), EAP-TLS, EAP-TTLS and PEAP the Dot1X user name
and the Dot1X user password must be configured.
With the setting "Auto" either the certificate must be loaded or the Dot1X user name and the
Dot1X user passport must be configured.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03
Configuring with Web Based Management
6.10 "Security" menu
319