Siemens SCALANCE W1780 Configuration Manual page 157

● Save
With this button, you can save files from the device. The button can only be enabled if this
function is supported by the file type and the file exists on the device.
● Delete
With this button, you can delete files from the device. The button can only be enabled if this
function is supported by the file type and the file exists on the device.
Note
Following a firmware update, delete the cache of the Web browser.
Procedure
Loading files using HTTP
1. Start the load function by clicking the one of the "Load" buttons.
The dialog for loading a file opens.
2. Go to the file you want to load.
3. Click the "Open" button in the dialog.
The file is now loaded.
Whether or not a restart is necessary, depends on the loaded file. If a restart is necessary, a
message to this effect will be output. Other files are executed immediately, for example the CLI
script file and new settings are applied without a restart.
Saving files using HTTP
1. Start the save function by clicking the one of the "Save" buttons. Depending on the size of
the file this may take some time.
2. Depending on your browser configuration you will be prompted to select a storage location
and a name for the file. Or you accept the proposed file name. To make the selection, use
the dialog in your browser. After making your selection, click the "Save" button.
Deleting files using HTTP
1. Start the delete function by clicking the one of the "Delete" buttons.
The file will be deleted.
Reusing configuration data
If several devices are to receive the same configuration and the IP addresses are assigned
using DHCP, the effort for configuration can be reduced by saving and reading in the
configuration data.
Follow the steps below to reuse configuration data:
1. Save the configuration data of a configured device on your PC.
2. Download this configuration file to all other devices you want to configure.
3. If individual settings are necessary for specific devices, these must be made online on the
relevant device.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03
Configuring with Web Based Management
6.5 "System" menu
157