System Settings - Siemens SCALANCE W1780 Configuration Manual

Configuring with Web Based Management
6.3 "Wizard" menu
6.3.1.1

System Settings

Introduction
On this Basic Wizard page, you specify the mode of the device. After changing the mode, a
message is displayed.
If you confirm the message with "OK", the device restarts with the factory-set configuration
settings. Log in again and start the Basic Wizard to continue the configuration of the device for
the selected mode.
Note
Because only access points can work in client mode as well, the mode can only be selected for
these devices.
62
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03