Siemens SCALANCE W1780 Configuration Manual page 114

Configuring with Web Based Management
6.4 "Information" menu
● Web Server
You configure the setting in "System > Configuration".
– HTTP/HTTPS: Access to the WBM is possible with HTTP and HTTPS.
– HTTPS: Access to the WBM is now only possible with HTTPS.
● SNMP
You can configure the setting in "System > SNMP > General".
– "-" (SNMP disabled)
– SNMPv1/v2c/v3
– SNMPv3
● Management ACL
You configure the setting in "Security > Management ACL".
– Disabled: no access restriction
– Enabled: no access restriction
– Enabled: restricted access only
● Login Authentication
You configure the setting in "Security > AAA > General".
– Local
– RADIUS
– Local and RADIUS
● Password Policy
Shows which password policy is currently being used.
114
Access to device parameters via SNMP is not possible.
Access to device parameters is possible with SNMP versions 1, 2c or 3.
Access to device parameters is possible only with SNMP version 3.
The access control is disabled.
The access control is enabled but no access rules have been defined.
The access control is enabled and access rules have been defined.
Login with local user name and password.
Login using a RADIUS server.
The login is possible both with the users that exist in the firmware (user name and
password) and via a RADIUS server. The local users have priority.
Note
The user is first searched for in the local database. If the user does not exist there or the
password does not match, a RADIUS query is sent.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03