● Password Confirmation
Confirm the password.
● Status
Shows whether the current settings for the file match the device.
– Valid
– Invalid
– '-'
Procedure
1. Enter the password in "Password".
2. To confirm the password, enter the password again in "Password Confirmation".
3. Select the "Enabled" option.
4. Click the "Set Values" button.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03
The "Enabled" check box is selected and the password matches the file.
The "Enabled" check box is selected but the password does not match the file or no file
has been loaded yet.
The password cannot be evaluated or is not yet being used. The "Enabled" check box is
not selected.
Configuring with Web Based Management
6.5 "System" menu
165