Events; Configuration - Siemens SCALANCE W1780 Configuration Manual

Configuring with Web Based Management
6.5 "System" menu
6.5.8

Events

6.5.8.1

Configuration

Selecting system events
On this page, you specify how a device reacts to system events. To enable or disable the
options, click the relevant check boxes of the columns.
Description
With Table 1, you can enable or disable all check boxes of a column of Table 2 at once. Table
1 has the following columns:
● All Events
Shows that the settings are valid for all events of table 2.
● E-mail / Trap / Log Table / Syslog / Faults
Enable or disable the required type of notification for all events. If "No Change" is selected,
the entries of the corresponding column in table 2 remain unchanged.
● Copy to Table
If you click the button, the setting is adopted for all events of table 2.
166
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03