Siemens SCALANCE W1780 Configuration Manual page 180

Configuring with Web Based Management
6.5 "System" menu
Description
The page contains the following boxes:
● Pool ID
From the drop-down list, select the required IPv4 address band.
● Hardware Type
Select the method according to which a client is identified.
– Ethernet MAC
– Client ID
● Value
Enter the MAC address or the client ID and click the "Create" button to create the entry.
Note
A maximum of 20 entries are possible.
The table has the following columns:
● Select
Select the check box in the row to be deleted.
● Pool ID
● Shows the number of the IPv4 address band.
Note
Only Pool ID = 1 is supported.
● Identification Method
Shows whether the client is identified by its MAC address or the client ID.
● Value
Shows the MAC address to which the IPv4 address is assigned.
● IP Address
Specify the IPv4 address. The IPv4 address must match the subnet of the IPv4 address
band.
180
The client is identified by its MAC address.
The client is identified by a freely defined DHCP client ID. The client ID can be up to a
maximum of 254 characters long.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03