Syslog Messages - Siemens SCALANCE W1780 Configuration Manual

Parameter
channel
signal strength
version
length
network interface
E.3

Syslog messages

This section describes selected Syslog messages. The selection is based on IEC 62443-3-3.
This means you can integrate these events into a central monitoring system (SIEM).
Identification and authentication of human users
Log text
Standard
Description
Example
Severity
Facility
Log text
Standard
Description
Example
Severity
Facility
Log text
Standard
Description
Example
Severity
Facility
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03
Description
Name of the channel
Format: %s
Signal strength
Format: %d
Name of the version
without spaces
Format: %s
Length of the network packet (in bytes)
Format: %d
Symbolic name of a network interface
Format: %s
{protocol}: User {user name} logged in from {ip address}.
IEC 62443-3-3 Reference: SR1.1
Valid login information that is specified during remote login.
WBM: User admin logged in from 192.168.0.1.
Info
local0
{protocol}: Default user {user name} logged in from {ip address}.
IEC 62443-3-3 Reference: n/a (NERC-CIP 007-R5)
User logged in with default user name and password.
SSH: Default user admin logged in from 192.168.0.1.
Info
local0
{protocol}: User {user name} logged out from {ip address}.
IEC 62443-3-3 Reference: SR1.1
User session completed - logged out.
SSH: User admin logged out from 192.168.0.1.
Info
local0
Appendix E
E.3 Syslog messages
Possible values or example
12
12
V1.0.3SP1
52
vlan 1
357