I&M - Siemens SCALANCE W1780 Configuration Manual

Table 2 has the following columns:
● Software
– Firmware
– Bootloader
– Firmware_Running
● Description
Shows the short description of the software.
● Version
Shows the version number of the software version.
● Date
Shows the date on which the software version was created.
6.4.3 I&M
Identification and maintenance data
This page contains information about device-specific vendor and maintenance data such as
the article number, serial number, version numbers etc. You cannot configure anything on this
page.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03
Shows the current firmware version. If a new firmware file was downloaded and the
device has not yet restarted, the firmware version of the downloaded firmware file is
displayed here. After the next restart, the downloaded firmware is activated and used.
Shows the version of the boot software stored on the device.
Shows the firmware version currently being used on the device.
Configuring with Web Based Management
6.4 "Information" menu
91