Removing The Rac Cover; Figure C-1. Removing The Screws From The Model 8000 Rac Cover - Bay Networks 8000 RAC Installing Manual

Appendix C Data Compression Upgrade Instructions

Removing the RAC Cover

Installing the Model 8000 Remote Access Concentrator
C-2
Observe handling precautions for digital telecommunications
cables.
To remove the RAC cover:
1. Unplug the RAC and disconnect all cables.
2. Remove the four screws from the back of the unit
(Figure C-1).
3. Lift the cover up from the back of the unit and off
(Figure C-2).

Figure C-1. Removing the Screws from the Model 8000 RAC Cover

RA0023A