Removing Modem Cards - Bay Networks 8000 RAC Installing Manual

Appendix B Modem Upgrade Instructions

Removing Modem Cards

Installing the Model 8000 Remote Access Concentrator
B-6
Occasionally you may need to remove modem cards from the RAC (for
example, if a modem card fails and needs to be replaced). On the RAC,
there are two locations that can accommodate modem cards (up to 62
modems total).
To remove a modem card from the RAC
1. Locate the modem card that you want to remove.
2. Push in the locking tab on the nylon standoff that secures a
corner of the modem card to the main logic board, and
gently work that corner of the card off the nylon standoff
(Figure B-4).
3. Repeat the procedure for the other three corners of the
modem card.
4. Lift the modem card straight out of its connector.
(Figure B-4):