Booting Using Bfs - Bay Networks 8000 RAC Installing Manual

Chapter 2

Booting Using BFS

To boot the RAC using the block file server (BFS):
1. Initialize the IP address parameters using either the
autoinitialize or manual initialize method.
The autoinitialization method is described in
the IP Address Parameters on page
initialization method is described in
IP Address Parameters on page
2. Enter the boot command.
If you do not enter a file name with the command, you are
prompted for one (the default file name is displayed at the
prompt: oper.64.enet). Press Return to boot using the default file
name.
The following example shows a typical screen display for a BFS
boot using erpcd on UNIX or Windows NT:
Enter boot file name[oper.64.enet]::
Requesting boot file "oper.64.enet".
Unanswered requests shown as '?',transmission errors
as '*'.
Requesting boot from 192.9.200.88 via Ethernet...
Booting BFS file using open delay of 8
Booting BFS file from 192.9.200.88
Header received OK. Received data blocks shown as '.'.
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .. . . . . . . . . . . ? . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . * . . . . .
. . . . . . . . . . . . . . . . . . . . . . . * . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . ? . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EOF
Installing the Model 8000 Remote Access Concentrator
Installing the Model 8000 Remote Access Concentrator
2-19. The manual
Manually Initializing the
2-22.
Autoinitializing
2-23