Ports - Bay Networks 8000 RAC Installing Manual

ports

The ports command tests the WAN interface port. The syntax is:
ports
To test the WAN port, the interface must be connected to a loopback plug.
No external clocking is required.
When invoked, the command displays a menu of options. The following
is a sample screen display for a T1 (24 modems) or E1 (32 modems)
version of the RAC.
monitor:: ports
WAN Port Tests
Some Important Notes:
- These tests require the WAN port to have a loopback
plug installed.
1) Digital Ports
2) Modem Ports
3) Sync Ports
Selection (Return to exit)::
The following is a sample screen display for a modemless version of the
RAC.
monitor:: ports
WAN Port Tests
Some Important Notes:
- These tests require the WAN port to have a loopback
plug installed.
1) Digital Ports
2) Sync Ports
Selection (Return to exit)::
Installing the Model 8000 Remote Access Concentrator
Chapter 3 ROM Monitor Commands
3-21