Table of Contents
Advertisement
Table 3-1. ROM Monitor Commands ( continued )
Command
config
erase
help
image [-d | <file>]
lat_key [-d]
net
ping
ports [-d]
sequence [-d | <list>]
stats
Installing the Model 8000 Remote Access Concentrator
Chapter 3
Description
Displays the current
hardware configuration
and revision levels.
Erases nonvolatile
memory.
Displays the list of ROM
Monitor commands.
Displays and/or sets the
load image and tftp load
dump names.
Sets the LAT key.
Executes an Ethernet
transceiver loopback test.
Sends ICMP
ECHO_REQUEST
datagram to a host or
gateway.
Shows the current status
of a WAN interface port.
Displays and edits the
load/dump interface list.
Displays current network
statistics gathered by the
ROM.
ROM Monitor Commands
Use
Identifying your
hardware, memory,
and ROM versions.
Clearing out old
parameters.
Referencing the
ROM monitor
commands.
Loading an image that
differs from the
default.
Connecting to a VMS
host.
Checking your
Ethernet connection.
Checking to see
whether a host or
gateway can be
reached.
Testing a WAN
interface port or
modem hardware.
Checking or
changing the load/
dump interface list.
Checking network
resources.
3-3
Advertisement
Table of Contents
