Stats; Table 3-2. Network Statistics - Bay Networks 8000 RAC Installing Manual

Chapter 3 ROM Monitor Commands
Installing the Model 8000 Remote Access Concentrator
3-24

stats

The stats command displays current network statistics gathered by the
ROM. Use stats along with the boot command to help isolate problems.
Table 3-2 describes the network statistics displayed by the stats
command. The syntax is:
stats
The stats command display looks like this:
monitor:: stats
Ethernet Statistics
Frames Received:
CRC Errors:
Alignment Errors
Resource Drops:
Bus Wait Drops:
Bad Types/Lengths:
W
ARNING

Table 3-2. Network Statistics

Statistic
Frames Received
CRC Errors
Alignment Errors
Resource Drops
(continued on next page)
398 Frames Sent:
0 Carrier Sense Losses:
0 Clear to Send Losses:
0 Collisions Detected:
0 Excessive Collision Losses: 0
0
Description
The number of frames received.
The number of CRC checksum errors detected.
The number of frames received that do not contain
enough bits to fill the last byte.
The number of packets dropped because the ROM
code could not buffer them quickly enough. The
ROM code cannot always handle back-to-back
incoming packets. The RAC accepts the first
response it receives and drops all others. Dropped
packets are normal.
3
0
0
0