Connecting Aui Cable; Figure 2-5. Connecting An Aui Cable - Bay Networks 8000 RAC Installing Manual

Chapter 2

Connecting AUI Cable

To connect an AUI cable to the RAC
1. Make sure the transceiver cable is plugged into the Ethernet
network.
2. Push the slide mechanism on the RAC's Ethernet connector
to the right and plug in the transceiver cable.
3. Push the slide mechanism to the left to secure the
connection.

Figure 2-5. Connecting an AUI Cable

Installing the Model 8000 Remote Access Concentrator
Installing the Model 8000 Remote Access Concentrator
(Figure 2-5):
RA0008A
2-9