1. Manuals
  2. Brands
  3. Bay Networks Manuals
  4. Switch
  5. Bay Networks 2000
  6. Getting started manual

Bay Networks 2000 Getting Started Manual

Extranet access switch
Hide thumbs Also See for Bay Networks 2000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual, Manual
Bay Networks
Extranet Switch 2000
Getting Started Guide

Advertisement

Table of Contents
loading

Related Manuals for Bay Networks Bay Networks 2000

Summary of Contents for Bay Networks Bay Networks 2000

  • Page 1 Bay Networks Extranet Switch 2000 Getting Started Guide...

  • Page 2: Restricted Rights Legend

    Bay Networks Part Number: Date: April 1998 Accuracy Notice The products and specifications, configurations, and other technical information regarding the products contained in this document are subject to change without notice. All statements, technical information, and recommendations contained in this document are believed to be accurate and reliable but are presented without warranty of any kind, expressed or implied, and users take full responsibility for their application of any products specified in this document.

  • Page 3: Table Of Contents

    Preface ...v Extranet Switch Documentation Map ... vi Conventions ... vii Documentation ... vii User Interface ... vii Bay Networks Customer Service ... viii Checking the Components ...1 Front View ... 1 Components List ... 2 Optional Sliding Rail Bracket Set ... 2 Cabling the Switch ...3...
  • Page 4 Display Setting ... 17 Extranet Switch Welcome Display... 18 Preparing for Configuration ... 20 Quick Start... 20 Guided Configuration ... 21 Manage Extranet Switch... 21 Registration... 21 Notebook... 21 Logging in and Supplying a Password... 22 Quick Start Configuration Prerequisites... 23 Required Environment ...

  • Page 5: Preface

    This Getting Started Guide will step you through the necessary tasks to get your Switch up and running fast. This guide provides information on the following: Components Cabling, Lights, and LEDs Assigning a System Identity Accessing a Web Browser Managing the Switch...

  • Page 6: Extranet Switch Documentation Map

    Extranet Switch Documentation Map This map lists the associated documentation that you will need to configure and manage your Bay Networks Extranet Switch and represents the order that you would typically follow. Bay Networks Extranet Switch 1000/2000/4000 Getting Started Guides...

  • Page 7: Conventions

    Conventions This guide refers to the Bay Networks Extranet Access Switch 2000 as the Switch. This document assumes that you are familiar with Web browsers and their general operation. Documentation This document uses the following conventions to distinguish among notes of varying importance: NOTE: Take notice.

  • Page 8: Bay Networks Customer Service

    Bay Networks Customer Service Contact the appropriate Technical Solutions Center below to get help on your Switch. Technical Solutions Center United States and Canada Valbonne, France Sydney, Australia Tokyo, Japan Latin America viii Telephone Number Fax Number 800-2LANWAN (800- 978-916-3514 252-6926);...

  • Page 9: Checking The Components

    Chapter 1 Checking the Components Before you begin cabling and configuring the Bay Networks Extranet Switch, examine the product packaging to be sure that you have all the necessary components. Front View Following is a front view of the Switch.

  • Page 10: Components List

    The following table lists all of the components and accessories of the Bay Networks Extranet Switch 2000. Description Extranet Switch 2000 Power Cord (US and Canada only) Molded Serial Cable DB9/DB25-to-DB9/DB25 Bay Networks Extranet Switch CD-ROM Recovery Diskette IP Address Configuration Utility Diskette Administrator's Guide Getting Started Guide Extranet Switch Release Notes...

  • Page 11: Cabling The Switch

    LEDs when the Switch is powered on. LAN Speed Selection The Switch automatically determines the speed of the LAN connection during power-up. To change the speed simply power down the Switch, connect to the desired LAN, and power the unit back up. LAN Interface 100BASE-TX connections require Category 5, twisted-pair wire.

  • Page 12: Connector Pinouts

    10/100BASE-TX Pinouts Optional WAN Interface The WAN connectors are located on a PCI card that is installed in the switch. Two DB26S connectors provide the signals needed to interface to V.35 equipment. Included in the accessory box are two cables that map the DB26S signals to a standard V.35 connector.

  • Page 13: Serial Cable

    1. Connect the 10/100BASE-TX LAN RJ-45 connector to the Switch. 2. Connect the power cord to the back of the Switch and to the electrical outlet. 3. Additionally, if you have LAN or WAN cards in Slots 1 through 3, connect those cables (refer to Installing Optional Cards on page 44).

  • Page 14: Understanding The Lights And Leds

    The Power light is green when the power is on; if it is flashing, there is a hardware failure and you should contact Bay Networks. The Reset light is green, and when it flashes the Switch is either reading or writing to the disk. You can press the Reset button to restart the Switch, however, Bay Networks recommends that you restart the Switch from the System Shutdown display (refer to the Administrator's Guide for details).
  • Page 15 Figure 6 10/100BASE-TX LAN LEDs 10/100BASE-TX LAN LED Card Indicators Indicator On or Flashing Cabling the Switch Description The cable connections between the card and the device to which this interface is attached are good. The cable connections between the card and the device to which this interface is attached are faulty.

  • Page 16: Assigning A System Identity

    Serial Interface Configuration Procedure, that allow you to assign a Management IP Address, subnet mask, and optional default gateway address to your Extranet Switch. The Management IP Address is the address that is used for all system services, such as HTTP, FTP, and SNMP. The Management IP Address will enable you to manage the Switch from a Web browser.

  • Page 17: Startup Configuration Requirements

    Enter a Management IP Address for the system. You need this address to manage all system services, such as HTTP, FTP, and SNMP. This address must be accessible from one of the Switch's private physical interfaces. In order to do so, the Management IP Address must map to the same network as one of the private interfaces.

  • Page 18: Private And Public Interfaces

    TCP/IP, FTP, HTTP, etc. The Private interface also accepts tunneled protocols (e.g., IPsec, PPTP, L2TP, and L2F) that can be used for secure management access to the Switch. Public Indicates that this interface is attached to a Public Data Network like the Internet.

  • Page 19: Ip Address Configuration Utility

    Address Configuration Utility you must have the following: A PC running Windows 95 or Windows NT with a functioning TCP/IP stack. The PC must be running on the same subnet as the Switch that is to be configured, and it must have an operational network connection.
  • Page 20 Figure 9 IP Address Configuration Utility Display 3. Assign a Management IP Address and Subnet Mask to the Switch; the Default Gateway address is optional and can be added later (refer to Startup Configuration Requirements on page 10 for descriptions of the required fields).

  • Page 21: Serial Interface Configuration

    Configuration Utility (refer to page 12) to provide the Switch with its initial IP configuration information. Alternatively, you can use this procedure to access the Switch via the Serial Interface of your PC. Typically the Serial Interface configuration procedure is only necessary in a system recovery situation.

  • Page 22: Procedure

    Procedure 1. Connect the serial cable from the Switch’s serial cable port to a terminal or a communications port of a PC. 2. Using a terminal emulation program, such as Hyper Terminal, press the Enter key and you are prompted to enter a user name and password. The factory...
  • Page 23 Switch from a Web browser. IMPORTANT: This Administrator's Password is also the Primary Administrator's Password. This password guarantees access to the Switch via the Serial Port or a Web browser. Refer to page 29 for additional details. 01001 Sample Serial Interface Display...

  • Page 24: Managing The Switch

    This chapter describes the recommended Web browsers, the default login and passwords to gain access to the Bay Networks Extranet Access Switch, and the Quick Start Configuration. Recommended Web Browser Versions and Settings Bay Networks Extranet Manager uses Java, JavaScript, and HTML features.

  • Page 25: Extranet Switch Welcome Display

    Figure 11 shows the alternatives you have when first configuring your Switch. Bay Networks recommends that you begin with the Quick Start or the Guided Configuration. Once you are familiar with the Switch's navigation menu and capabilities, then you will want to select Manage Extranet Switch.
  • Page 26 Figure 12 shows a sample Extranet Switch Welcome display. Descriptions of each configuration option follow. A detailed checklist describes things you will need to properly configure your Switch. Then full details of the different procedures are described. Complete details for configuring and monitoring the Switch are in the Bay Networks Extranet Switch Administrator's Guide.

  • Page 27: Preparing For Configuration

    Click to begin the Quick Start Configuration. This option allows you to configure interfaces, set up PPTP tunnels for up to three users, and establish a connection to the Switch. If you prepare for the configuration (as recommended on page 24), the Quick Start can take as little as 15 minutes to complete.

  • Page 28: Guided Configuration

    Registration Click to register the Switch with Bay Networks. It will only take a few minutes and it will give you access to the latest software and technical tips. Your Switch requires Internet access in order to register.

  • Page 29: Logging In And Supplying A Password

    Logging in and Supplying a Password Start up a Web browser and enter your Switch's Management IP Address. Select an option in the navigational menu and submenu, and then you are prompted for the Login and Password. Enter the system...

  • Page 30: Quick Start Configuration Prerequisites

    This display acts as a checklist for you to prepare for the Quick Start Configuration. Assembling the information beforehand, and verifying that you can establish a PPTP Client session, makes the Quick Start easy. Figure 13 Managing the Switch Quick Start Prerequisites Display...

  • Page 31: Required Environment

    The local database is internal to the Switch. An LDAP server and associated database will be set up locally on the Switch for the Quick Start procedure. Later, you can switch to a network-available external LDAP server using the LDAP Intermediate File (LDIF) data format.

  • Page 32: Prerequisites

    PPTP Users (up to 3) Administrator Post-Configuration Testing A PPTP remote user dialing in from an external system. Refer to the Bay Networks Extranet Switch Administrator's Guide, the Switch’s online help, and the Microsoft PPTP documentation for additional information. Managing the Switch...

  • Page 33: Configuration

    Private (your private LAN) or Public (public data networks), and configure up to three PPTP Users and an Administrator with User IDs and Passwords. Additionally, you can set the system’s Date and Time. Figure 14 Quick Start Configuration Display Managing the Switch...

  • Page 34: Lan/Wan Interfaces

    Switch. IP Address Enter an IP address for each interface on the Switch, including the LAN port. These IP addresses are used for tunnel creation. The IP Address consists of 32 bits, which are written as four octets in dotted-decimal format. For example: 192.168.34.21...

  • Page 35: Pptp Users

    Indicates that this interface is attached to the Private network and it can accept nontunneled networking protocols such as TCP/IP, FTP, HTTP, etc. The Private interface also accepts tunneled protocols (e.g., IPsec, PPTP, L2TP, and L2F) that can be used for secure management access to the Switch. PPTP Users User ID Enter a User ID.

  • Page 36: Administrator

    Note that there can be only one Primary Administrator. User ID Enter an appropriate User ID for the Primary Administrator. This UID has the privileges to modify and view all controls in the Switch. Password Enter a user Password for the Primary Administrator.

  • Page 37: Automatic Backup

    IMPORTANT: You should configure Automatic Backups immediately so that you will not lose system or configuration information in case of problems. You configure the Automatic Backup servers from the Admin Automatic Backup display. Managing the Switch...

  • Page 38: Extranet Access Client Installation

    CLIENT, then click the ADD button again. Select Microsoft followed by Client for Microsoft Networks and finally the OK button. You will need your Windows 95 CD if it is not already copied on your system. Managing the Switch to get the MSDUN12 patch.
  • Page 39 Remove button. This forces the Network Neighborhood to use NetBIOS over TCP/IP, which is compatible with the Extranet Switch. C. Under the Identity tab, configure the Workgroup to be the same as your company's internal workgroup. For example, "baynetworks."...

  • Page 40: Windows Nt 4.0

    To install the Bay Networks Extranet Access Client onto a Windows NT 4.0 PC, you must first copy and install the Extranet Access Client (Eac_10d.exe) that is on the Bay Networks Extranet Switch CD in the Client folder. 1. Install Eac_10d.exe by double-clicking on the program name. The installation is self-explanatory.

  • Page 41: Rack Mounting

    This chapter describes two methods you can use to mount your Switch into a chassis rack. Rack-mount brackets for use with a two-post rack (page 36). Sliding rails for use with a four-post rack (optional purchase). Following are standard rack-mounting considerations that Bay Networks...

  • Page 42: Mounting Brackets

    Mounting Brackets The following illustration shows mounting brackets being attached to a Switch in preparation of a two-post rack mount installation. Position the brackets with the rack-mount bracket facing outward (as shown below). Optionally, you can mount the brackets in the rear of a rack.
  • Page 43 Bay Networks recommends that you have two people available when installing the rack-mount brackets. 1. Position the bracket onto the Switch (as shown on the previous page), then screw in the four rack-mounting screws. Repeat this step on the other side of the chassis.

  • Page 44: Sliding Rails (Optional)

    The following illustration shows the optional sliding rail assembly that enables you to slide the Switch out of the rack and lift off the top cover for interior access. Note that the sliding rail kit is optional and is separately orderable.
  • Page 45 R ack M ounting S crew s R ack M ounting B racket(s) M ounting R ail Figure 16 Sliding Rail Installation for a Four-Post Chassis Rack Mount Rack Mounting...
  • Page 46 Sliding Rail Installation Procedure NOTES: Insert all bracket mounting screws so that the screw heads are inside the slides. Do not use washers on the inside of the slides. Mount the side brackets parallel to each other. Determine if the unit will slide to the front or rear of the rack. These instructions are for sliding the chassis forward;...

  • Page 47: Changing Hardware Configurations

    Switch to avoid damaging them. WARNING: To install LAN and WAN cards you must first remove the Switch's top cover. To replace a power supply or to use the Recovery Diskette, you must remove the front bezel of the Switch.
  • Page 48 Figure 17 1. Turn off the Switch's power and unplug it. 2. Remove the three screws at the top rear of the chassis. 3. Slide the top cover back and move it away from the chassis.

  • Page 49: System Board

    System Board Figure 18 shows the Switch's System Board, in particular the DIMMs, Option Cards Slots, Cooling Fans, and Replaceable Battery are noted. Figure 18 WARNING: Changing Hardware Configurations Switch's System Board Beware of danger if the battery is incorrectly replaced.

  • Page 50: Installing Option Cards

    Installing Option Cards The following illustration shows you how install LAN or WAN option cards into the Switch. You can use Slots 1 to 3 for any mix of LAN and WAN cards. Note that Slot 4 is not supported.

  • Page 51: Installing Additional Dimms

    (i.e., if the DIMM # 1 slot is populated, then add the next DIMM to the DIMM # 2 slot). Figure 20 1. Power off the Switch. 2. Press down the locking levers on both sides of the DIMM. 3. Pull the DIMM up to remove it from the slot.

  • Page 52: Memory Options

    Memory Options The Switch ships with 64-MB memory installed. In case you want to increase the memory, this table lists memory from different vendors that has been tested with the Switch's System Board, and the vendor's accompanying part number. Vendor...

  • Page 53: Replacing A Power Supply

    Replacing a Power Supply Turn off the Switch before attempting to replace a Power Supply. Replacing a power supply involves the following steps: 1. Remove the top cover (three screws). 2. Remove the four exterior screws that secure the Power Supply to the rear of the Switch.

  • Page 54: Removing The Front Bezel

    Removing the Front Bezel The following illustration shows you how to remove the front bezel from the Switch. You must remove the bezel to insert the Recovery Diskette. Figure 21 S lid e fin g e r s b e h in d...
  • Page 55 Remove the Switch front bezel as follows: 1. Optionally, remove the three screws at the top rear of the chassis, then slide the top cover back. 2. Slide your fingers between the front bezel and the Switch. 3. Pull forward firmly. Changing Hardware Configurations...

  • Page 56: Removing The Hard Disk Drive

    Removing the Hard Disk Drive The following illustration describes how to remove a Hard Disk Drive from the Switch. Figure 22 Removing the Hard Disk Drive Changing Hardware Configurations...

  • Page 57: Replacing The Hard Disk Drive

    Replacing the Hard Disk Drive The following steps describe Replacing the Hard Disk Drive. 1. Reattach the four screws securing the drive to the disk drive tray. 2. Put the disk drive tray back inside the chassis and slide it back over the two standoff screws.

  • Page 58: Specifications

    Physical Depth: 17 in. (43.18 cm) Width: 16.75 in. (42.55 cm) Height: 7.00 in. (17.78 cm) Weight: 25.0 lbs. (11.34 kg) Electrical: 110-120/220-240V, 6.0/3.0A 50-60Hz Operating Environment Temperature: 32°F-122°F (0°C-50°C) Relative Humidity: 10%-90% non-condensing Appendix A Specifications Changing Hardware Configurations...

  • Page 59: Special Notices

    This appendix provides information on statements of conditions, the Bay Networks Software License Agreement, and RADIUS attribution. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, Bay Networks, Inc. reserves the right to make changes to the products described in this document without notice. Bay Networks, Inc.
  • Page 60 EC Declaration of Conformity This product conforms (or these products conform) to the provisions of Council Directive 89/336/EEC and 73/23/EEC. The Declaration of Conformity is available on the Bay Networks World Wide Web site at www.baynetworks.com. Voluntary Control Council for Interference (VCCI) Statement This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI).
  • Page 61 Bay Networks, Inc. Software License Agreement NOTICE: Please carefully read this license agreement before copying or using the accompanying software or installing the hardware unit with pre-enabled software (each of which is referred to as “Software” in this Agreement). BY COPYING OR USING THE SOFTWARE, YOU ACCEPT ALL OF THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT.
  • Page 62 3. Limited warranty. Bay Networks warrants each item of Software, as delivered by Bay Networks and properly installed and operated on Bay Networks hardware or other equipment it is originally licensed for, to function substantially as described in its accompanying user manual during its warranty period, which begins on the date Software is first shipped to Licensee.
  • Page 63 Bay Networks the Software, user manuals, and all copies. Bay Networks is not liable to Licensee for damages in any form solely by reason of the termination of this license. 8. Export and Re-export. Licensee agrees not to export, directly or indirectly, the Software or related technical data or information without first obtaining any required export licenses or other governmental approvals.
  • Page 64 RADIUS (Remote Authentication Dial In User Service) Livingston Enterprises, Inc. 6920 Koll Center Parkway Pleasanton, CA 94566 Copyright 1992 Livingston Enterprises, Inc. Permission to use, copy, modify, and distribute this software for any purpose and without fee is hereby granted, provided that this copyright and permission notice appear on all copies and supporting documentation, the name of Livingston Enterprises, Inc.

  • Page 65: Index

    41 administrator, 25 administrator settings, 29 antistatic, 41 automatic backup, 30 Bay Networks Customer Service, viii Bay Networks Extranet Switch Administrator's Guide, 19 Category 3, 4 wiring requirements, 3 Category 5 wiring requirements, 3 caution, vii components...
  • Page 66 LAN cards, 27 installing, 41, 44 LDAP, 24 LEDs system board, 6 length, 51 login default, 22 Manage Extranet Switch, 18, 21 memory 64-MB, 46 memory, increasing vendors, 46 Microsoft Internet Explorer, 17 Netscape cache settings, 17 option card slots, 5...
  • Page 67 time, 29 top cover removing, 41, 42 user ID, 28 user interface, vii WAN cards, 27 installing, 41, 44 WAN connection DSU/CSU, 5 warning, vii Web browser, 14 Web browsers recommended, 17 weight, 51 Welcome display, 18 width, 51...

Table of Contents