Table 4-3. Normal Mode Error Led States - Bay Networks 8000 RAC Installing Manual

Chapter 4 Troubleshooting Procedures
Activity NE2:
Hardware Failure
Activity NE5: Booted
Wrong Image
Installing the Model 8000 Remote Access Concentrator
4-6

Table 4-3. Normal Mode Error LED States

Activity
NE2: Hardware Failure
NE5: Booted wrong image
Key:
On continuously
Off
Flashing regularly (about 1Hz)
The ROM diagnostics detected a hardware problem requiring service;
call the Technical Solutions Center.
The RAC loaded the wrong image. Press the Reset button for 3 seconds
to reset the device. To prevent this problem in the future:
• Make sure that you configure the RAC with the appropriate
information about the location of the image. See
Remote Access Concentrator on page 2-19
information.
• Be sure that the image you are booting has the correct name.
Do not rename the image file unless you are making a copy
for backup.
• If you used an na, admin, or cli boot command, specify the
correct image and a valid file name.
If you do not know why the RAC booted the wrong image, enter Setup
mode and issue an image -d command. The command displays the image
file the RAC is trying to load.
STAT ATTN
Green Amber
for more
TRAF
Green
Booting the