Festo CPX Series Electronic Manual page 87

4. Diagnosis and error treatment
Contents of this chapter
Further information
Festo P.BE−CPX−CP−E N en 0405NH
This chapter contains information on the diagnostics of the
CPX−CP interface in the CPX terminal.
Fault messages of the CPX−CP interface
Diagnosing via LEDs
Diagnosing via the CPX−FEC or the CPX field bus node
(status bits and I/O diagnostic interface)
Diagnosing via the handheld
General information on diagnosing the CPX terminal can be
found in the CPX system manual (P.BE−CPX−SYS−..) and in the
manual for the CPX−FEC or the CPX field bus node.
Information on diagnosing CP modules can be found in the
description of the relevant CP module.
General information on operating the CPX terminal with the
handheld can be found in the manual for the Universal Hand
held CPX−MMI−1 (P.BE−CPX−MMI−1−..).
4−3