2. Installation
2.1
General instructions on installation
2−4
Warning
Sudden unexpected movements of the connected actua
tors and uncontrollable movements of loose tubing can
cause injury to human beings and damage to property.
Before carrying out installation and maintenance work,
switch off the following:
the compressed air supply
the operating voltage supply for the electronics/sensors
the load voltage supply for the outputs/valves.
Caution
Electrostatically sensitive components!
Do not touch the electrical contacts of the modules.
·
Observe the regulations for handling electrostatically
·
sensitive components.
In this way you will avoid damage to the electronics.
Please note
Handle all modules and components of the MPA valve
terminal with great care. Observe especially the following:
The specified torques must be observed.
Information on fitting the CPX terminal can be found in the
CPX system manual (P.BE−CPX−SYS−..).
Festo P.BE−CPX−CP−EN en 0405NH