Festo CPX Series Electronic Manual page 37

2. Installation
1
CP status LEDs
2
CP connections
3
Identification
labels
(accessories)
4
Save key
Fig. 2/1: Connecting and display elements on the CPX−CP interface
Dismantling
Festo P.BE−CPX−CP−EN en 0405NH
Electrical connecting and display elements
The following connecting and display elements can be found
on the CPX−CP interface:
4
3
Dismantling and fitting
The CPX−CP interface is fitted in a manifold sub−base of the
CPX terminal (see Fig. 2/2).
Dismantle the CPX−CP interface as follows:
1. Loosen the four screws with a Torx screwdriver size T10.
2. Pull the CPX−CP interface carefully and without tilting
away from the contact rails of the manifold sub−base.
L1
PS
L2 PL
L3 RN
L4
X1
X2
X3
X4
1
2
2−5