Error Diagnostics - Ethernet; You Do Not Know The Ip Address Of The Ts Adapter Ie; The Ts Adapter Ie Is Not Accessible Via Ethernet - Siemens SIMATIC TS Adapter IE Manual

8.8

Error diagnostics - Ethernet

8.8.1

You do not know the IP address of the TS Adapter IE.

Remedy
Follow the procedure described in the section "Set IP parameters by direct connection with
TeleService (Page 44)". steps 1 through 7.
8.8.2

The TS Adapter IE is not accessible via Ethernet

Remedy
1. If the Link LED is not lit, first check the Ethernet cabling.
2. Proceed as described in the following chapters:
3. If you are still unable to access the TS Adapter IE via Ethernet, reset the configuration of
If the TS Adapter IE is still not accessible via Ethernet, there is a hardware error. Inform
Customer Support in this case.
TS Adapter IE
Manual, 11/2010, A5E00977705-03
If the Link LED is lit, move on to step 2.
– "Setting IP Parameters by Direct Connection with TeleService (Page 44)"
– "Setting IP Parameters by Direct Connection with the SIMATIC Manager (Page 46)"
the TS Adapter IE using the P RES button.
NOTICE
If you reset the configuration of the TS Adapter IE, all the parameter settings you made
will be lost.
Repeat step 2.
Error diagnostics
8.8 Error diagnostics - Ethernet
77