Establishing A Remote Connection To The Ts Adapter Ie - Siemens SIMATIC TS Adapter IE Manual

7.7

Establishing a Remote Connection to the TS Adapter IE

There are two ways of establishing a remote connection to TS Adapter IE:
● Establishing a remote connection to the TS Adapter IE using TeleService
● Establishing a remote connection to the TS Adapter IE using a dial-up connection
In the delivery state and after resetting the parameters and after setting the IP address of the
TS Adapter IE, the calling PC is automatically assigned an available IP address. The IP
address can also be manually assigned.
Details about the automatic IP address assignment are available in the online help of the
TS Adapter IE .
Note
Before making a remote connection, make sure there are no address conflicts with devices
accessible from your PC.
If you are unable to establish a remote connection, refer to the "Error Diagnostics (Page 65)"
chapter.
TS Adapter IE
Manual, 11/2010, A5E00977705-03
7.7 Establishing a Remote Connection to the TS Adapter IE
Working with the TS Adapter IE
47