Siemens SIMATIC TS Adapter IE Manual page 64

Working with the TS Adapter IE
7.16 Resetting the Configuration with P RES button
Procedure
NOTICE
If you reset the configuration of the TS Adapter IE, all the parameter settings you made will
be lost.
1. Use a sharp implement, such as a paper clip, to press the P RES button and hold it down
Result
The TS Adapter IE is reset to its default configuration in the factory state.
64
for about 2 seconds.
The TS Adapter IE acknowledges the P RES reset by flashing the DCD LED three times.
TS Adapter IE
Manual, 11/2010, A5E00977705-03