Connecting The Ts Adapter Ie - Siemens SIMATIC TS Adapter IE Manual

Working with the TS Adapter IE

7.5 Connecting the TS Adapter IE

7.5 Connecting the TS Adapter IE
Connecting to the PC
Direct connection of the TS Adapter IE to the PC is only required for configuring the
TS Adapter IE.
1. Plug the Ethernet cable into the Ethernet port on the TS Adapter IE.
2. Plug the other end of the Ethernet cable into the Ethernet port X1 on your PC or to a
Connecting to the automation system
1. Plug the Ethernet cable into the Ethernet port on the TS Adapter IE.
2. Plug the other end of the Ethernet cable into the Ethernet port on your CPU or to a
Connecting to 24 V DC
Wire the supplied 24V power plug and plug it into the TS Adapter IE.
Note
Make sure the 24V supply cable is protected suitably for its cross-section.
42
switch.
NOTICE
If you confuse the Ethernet connector with the ISDN connector, the TS Adapter IE will
malfunction.
Make sure the Ethernet cable is connected only to the Ethernet port.
switch.
TS Adapter IE
Manual, 11/2010, A5E00977705-03