Hardware Requirements - Siemens SIMATIC TS Adapter IE Manual

Requirements for Operation

3.2 Hardware Requirements

3.2 Hardware Requirements
Overview:
● To work with the TS Adapter IE you will need a programming device (PG) or a PC with a
●  I n order to fulfill the installation requirements for UL, you must use a UL-listed NTBA on
● In order to fulfill the UL requirements, the following phone cable is required on the
14
DVD drive and Ethernet port.
the TS Adapter IE ISDN.
NTBA = Network Terminal Basic Adapter
TS Adapter II modem:
Phone cable of UL category DUXR, consisting of a line plus connector, with a cross-
section of AWG 26.
The supplied cable fulfills this requirement.
TS Adapter IE
Manual, 11/2010, A5E00977705-03