Setting The E-Mail Parameters - Siemens SIMATIC TS Adapter IE Manual

7.11

Setting the E-mail Parameters

Requirement
● The configuration interface of the TS Adapter IE is open.
Sending e-mail
The TS Adapter IE routes IP telegrams between its Ethernet port and the remote connection
to a dial-up server, such as to an Internet Service Provider (ISP).
Parameters for sending e-mail
If you want the TS Adapter IE to support e-mailing, you must make settings in the following
tabs in the configuration interface:
● "Parameters > Modem > Internal Modem"
● "Parameters > Modem > External Modem"
● "Parameters > IP Parameters"
● "Parameters > Outgoing Calls"
● "Security > Outgoing Calls > General"
● "Security > Outgoing Calls > Internet Protocols"
For more details, refer section on the relevant tabs of the configuration interface.
If the TS Adapter IE does not support e-mail, refer to the section "Not possible to send e-mail
(Page 75)".
Result
Once you have set the parameters, you can send an e-mail to an e-mail server from a
SIMATIC CPU via the TS Adapter IE.
TS Adapter IE
Manual, 11/2010, A5E00977705-03
Recommended settings:
"IP Masquerading (NAPT)" active
Firewall active, except "Internet Protocols"
Recommended setting:
Allow "SMTP (Simple Mail Transfer Protocol)"
Working with the TS Adapter IE
7.11 Setting the E-mail Parameters
59